Your mailbox sees a lot of wear over the years as it is constantly attacked by the elements but give it a fresh look when you learn how to paint metal mailboxes. You can paint metal mailboxes in no time when you learn how to do it. All you need are some common supplies and a bit of metal paint. When you paint metal you need to do so in a well ventilated area and with a drop cloth in place. Always use a drop cloth regardless if you are inside working or in your yard. The paint can easily destroy a floor and kill a lawn. In order to paint the mailbox you need to remove it from the mailbox post.
Use the screwdriver to do this by turning the screws to the left to loosen them. Make sure you put the screws in a safe place. Take the mailbox to the area where you will be working. Saturate a rag in the hot water and wring out the excess. Wipe the metal mailbox down to remove any dirt, excess moisture or oil that has formed on the metal. Use a clean rag to dry the mailbox.
Check the mailbox for any signs of rust. Use the wire brush to remove the rust from the metal. Wipe away the metal shavings with a rag and clean the mailbox again as you did previously. Apply painter’s tape to the flag. When you paint metal mailbox you need to be able to have a surface that that allows the paint to adhere to the metal. The primer paint is important because it creates that textured surface the metal paint needs to bond do. If the current paint job on the mailbox is very dark then you may need to use sandpaper to rough up the top coat of paint.
© 2005-2017 Find Your Decoration reference from Here !!. Reproduction without explicit permission is prohibited. All Rights Reserved. Theme by NiceOne